part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 1/7 5.6mm x 3.0mm surface mount led lamp attention observe precautions for handling electrostatic discharge sensitive devices typical applications entertainment and accent lighting architectural lighting ideal substitute for halogen and florescent lighting automotive interior and exterior lighting specialty lighting (mar kers, beacon, pathway) features 5.6mm x 3.0mm x 0.77mm smd led ir-reflow compatible standard package: 2,000pcs / reel white smd package with silicone resin msl (moisture sensitivity level): 2a rohs compliant notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice . package schematics
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 2/7 5.6mm x 3.0mm surface mount led lamp handling precautions compare to epoxy encapsulant that is hard and brittle, s ilicone is softer and flexible . although its characteristic significantly reduces thermal stress, it is more susc eptible to damage by external mechanical force. as a result, special handling precautions need to be ob served during assembly using silicone encapsulated led products. failure to comply might lead to damage and premature failure of the led. 1. handle the component along the side surfaces by using forceps or appropriate tools. 2. do not directly touch or handle the silicone lens surface. it may damage the internal circuitry. 3. do not stack together assembled pcbs containing exposed leds. impact may scratch the silicone lens or damage the internal circuitry. 4.1. the inner diameter of the smd pickup nozzle should not exceed the size of the led to prevent air leaks. 4.2. a pliable material is suggested for the nozzle tip to av oid scratching or damaging the led surface during pickup. 4.3. the dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. as silicone encapsulation is permeable to gases, some corrosive substances such as h 2 s might corrode silver plating of leadframe. special care should be taken if an led with s ilicone encapsulation is to be used near such substances.
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 3/7 5.6mm x 3.0mm surface mount led lamp absolute maximum ratings at t a =25c parameter symbol value unit power dissipation p d 450 mw junction temperature [1] t j 110 c operating temperature top -40 ~ +85 c storage temperature tstg -40 ~ +85 c dc forward current [1] i f 150 ma peak forward current [2] i fm 270 ma thermal resistance [1] (junction/ambient) r th j-a 130 c/w thermal resistance [1] (junction/solder point) r th j-s 60 c/w 8000 v electrostatic discharge threshold (hbm) reverse voltage v r 5 v part number emitting color lens-color luminous intensity cie127-2007* (i f =150ma) mcd luminous flux cie127-2007* (i f =150ma) lm viewing angle 2 1/2 min. typ. min. typ. XZMOLA143S red water clear 3600* 4190* 12* 13.7* 120 emitting material algainp notes: 1. rth(j-a) results from mount ing on pc board fr4 (pad size 16 mm 2 per pad) 2. 1/10 duty cycle, 0.1ms pulse width. 3. a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/ jesd625-a and jedec/j-std-033) notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. 3. leds are binned accordin g to their luminous flux . * luminous intensity / lu minous flux value is in accord ance with cie127-2007 standards. electrical / optical characteristics at t a =25c parameter symbol value unit typ. max. wavelength at peak emission cie127-2007* i f =150ma peak 631* nm dominant wavelength cie127-2007* i f =150ma dom [1] 623* nm spectral bandwidth at 50% rel max i f = 150ma 25 nm forward voltage i f =150ma v f [2] 2.5 3.0 v allowable reverse current i r 85 ma temperature coefficient of peak i f =150ma, -10 c t 100 c tc peak 0.11 nm/ c temperature coefficient of dom i f =150ma, -10 c t 100 c tc dom 0.09 nm/ c temperature coefficient of v f i f =150ma, -10 c t 100 c tc v -2.6 mv/ c min. 2 notes: 1.the dominant wavelength ( d) above is the setup value of the sorting machine. ( tolerance d : 1nm. ) 2. forward voltage: +/-0.1v. * wavelength is in accordance with cie127-2007 standards.
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 4/7 5.6mm x 3.0mm surface mount led lamp
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 5/7 5.6mm x 3.0mm surface mount led lamp
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 6/7 5.6mm x 3.0mm surface mount led lamp the device has a single mounting surface. the device must be mounted according to the specifications. reel dimension tape specification (units : mm) recommended soldering pattern (units : mm; tolerance: 0.1) led is recommended for reflow soldering and soldering profile is shown below.
part number: XZMOLA143S sep 16, 2016 xdsb7605 v2-z layout: maggie l. p. 7/7 5.6mm x 3.0mm surface mount led lamp packing & label specifications terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp
|
